| the forums at degreez.net http://forums.degreez.net/ |
|
| Instead of setting static ip, is it possible.... http://forums.degreez.net/viewtopic.php?f=2&t=6460 |
Page 1 of 1 |
| Author: | MarcwithaC [ Tue Nov 22, 2005 10:51 am ] |
| Post subject: | Instead of setting static ip, is it possible.... |
To just unblock the ports on the ip im logged into now.............I know this will change, but doesn't it only change when i restart my computer? In this case i could unblock ports on this ip and run a torrent, and just change the unblock anytime i reboot. I just wanna try this to see if the static ip setup is my problem.......... |
|
| Author: | Switeck [ Tue Nov 22, 2005 3:53 pm ] |
| Post subject: | |
Is this a firewall problem or a router problem? |
|
| Author: | Guest [ Thu Nov 24, 2005 11:29 am ] |
| Post subject: | |
router..................no hardware or software firewall |
|
| Author: | Switeck [ Fri Nov 25, 2005 12:26 pm ] |
| Post subject: | |
Ok, yes -- even with 'automatically assign an ip' setup for your computer, your computer's LAN ip can only change when you reboot your computer...and even then it might not change every time. The computer's LAN ip is almost always 192.168.something (where .something is typically .0.100 or 0.101 or .1.100 or .1.101). Your Router's LAN ip is almost certainly 192.168.1.1 or 192.168.0.1. Notice only the very last number is changed from the router to your computer. You can set your router to port-forward to whatever your computer's CURRENT LAN ip is and use that, and like you said that should work till you reboot your computer. |
|
| Author: | Guest [ Sun Nov 27, 2005 2:04 pm ] |
| Post subject: | |
how do I to change router to port-forward ? |
|
| Author: | Switeck [ Sun Nov 27, 2005 5:18 pm ] |
| Post subject: | |
Go here and follow instructions concerning your model of router: http://www.portforward.com/routers.htm |
|
| Author: | Guest [ Sun Nov 27, 2005 6:09 pm ] |
| Post subject: | |
I'm using Westtell 6100 and I flowing all instruction it show in there after enable the UPNP as it show but the light still yellow |
|
| Author: | Guest [ Sun Nov 27, 2005 8:43 pm ] |
| Post subject: | ftp |
I go to this links http://www.portforward.com/routers.htm and flowing every step in there then the BitTornado work like charm but my WS_FTP Pro before the upload speed 90kB/s after I make that change the speed drop down to 25kB/s can anyone help please |
|
| Author: | Switeck [ Sun Nov 27, 2005 8:45 pm ] |
| Post subject: | |
I didn't see anything about enabling UPNP at this page: http://www.portforward.com/english/rout ... orrent.htm You sure you did the right thing? Did you port-forward the same set of ip ports that BitTornado is using? Did you make 2 sets of port-forarding rules: 1 for TCP and another for UDP? Are you sure you forwarded to the right ip address? Did you disable Win XP's firewall? |
|
| Page 1 of 1 | All times are UTC - 7 hours [ DST ] |
| Powered by phpBB® Forum Software © phpBB Group http://www.phpbb.com/ |
|