the forums at

Page 1 of 3

Author:  cpc7272 [ Thu May 13, 2004 10:31 am ]
Post subject:  SMC7004ABR

Can anyone help me to config the router

Author:  punisher [ Thu May 13, 2004 3:52 pm ]
Post subject: 

SMC7004ABR manual

To enter the router web menu, enter the IP of the router in a web browser, default address is . The default password is blank, change it as soon as possible.
Go the the Setup menu, then click Virtual Server under Advanced Settings. There you can forward the ports needed by bittornado. You will have to forward as much ports as you want to run instances of bittornado simultanously. The default ports for bittornado start with port 6881 (you can change this within bittornado prefs). So enter 6881 as private and public port, the type is TCP. The private IP has to be the IP of the computer where bittornado runs, e.g. . Repeat this for more ports if needed. That's it.
Note that the private IP should be preferably a static IP.

Check your settings here:

Author:  cpc7272 [ Thu May 13, 2004 8:30 pm ]
Post subject: 

Thanks, By the way the static IP should be or ane so on....

Author:  punisher [ Fri May 14, 2004 12:23 am ]
Post subject: 

If you didn't change the defaults, is the router IP. The private IP is the same for all ports you configure.

Author:  bodhikun [ Fri May 14, 2004 4:49 pm ]
Post subject: 

Ok, I did all this and it still doesn't work...

I gave my pc and the others on my network a static IP,

I opened the ports in Virtual Server and in the Special Applications,

but I still have that bloody yellow light...

Is it cuz my ISP is still configured with a DHCP ? (at WAN)

Author:  bodhikun [ Fri May 14, 2004 6:16 pm ]
Post subject: 

Ok, it seems that my proxy server was blocking the speed...

Does anyone know how I could keep the green light AND my proxy settings?

Right now, I always have to disable the proxy server, whenever I want to use BT.

Author:  cpc7272 [ Sun May 16, 2004 8:57 am ]
Post subject: 

Thanks, punisher. I manage to set it up, and it works. The only thing is I need to setup the Special Application. My Trigger port is 6881 and Public port os 6881-6999.

Author:  punisher [ Sun May 16, 2004 10:41 am ]
Post subject: 

You can use trigger ports if you want to open various ports for an application, this also works with DHCP. If there is an outgoing connection on the trigger port, the configured public ports are opened for incomming connections.
But now to the interesting part, normally there is now outgoing connection on port 6881 caused by bittornado, so actually it should not work with port triggering on that port. :?:

Author:  Guest [ Tue Jun 01, 2004 2:49 pm ]
Post subject:  Even better

If you're not too worried about security, in the "Misc" tab, put in your local IP in the "Remote DMZ Host" thing, it basically opens all your ports. You might want to then get a better software port monitoring/blocking software. SMC sucks. ^_^

Author:  sT0NeD_ [ Mon Jun 14, 2004 9:51 am ]
Post subject: 

so what should i type in for the Private IP???

Author:  DG [ Fri Jun 18, 2004 1:22 am ]
Post subject:  7004 ABR

I just finished setting my router.
to get to the password screen
Log in
Click on Setup
Click on Virtual server
Find your local machine IP

1. Click the Start menu button on the Windows taskbar.
2. Click Run... on this menu.
3. Type cmd in the text box that appears. A command prompt window launches on the desktop.
4. In this command window, type ipconfig /all.
You should see the number there

Enter the last number of your IP to complete the "private IP"
"Private port" enter 6881
"Public port" enter 6881
Continue to do this for as many ports as you want open

Hope this helps...

Author:  Guest [ Tue Jun 29, 2004 2:48 pm ]
Post subject: 

Hey guys, i also have the smc router, i had it for a while now but now i don't know the pw at the log in screen, dose anyone know how to reset the pw?

Author:  pun¡sher [ Tue Jun 29, 2004 3:55 pm ]
Post subject: 

You need to reset the router: ... 568&site=c

Author:  Yolkboy [ Fri Jul 02, 2004 5:15 pm ]
Post subject: 

Hi all! I have the wireless version of this SMC router but I'm still getting the yellow light in BT. Under virtual server I put: Private IP / Private Port 6881 / Type TCP / Public Port 6881

In the next row I did the same thing exept the private and public port is 6882 and so forth up to 6889.

Am I doing something wrong? Is there any other fireware things I have to disable? Oh I am running Zone Alarm but even with it disabled I still get the yellow light so I don't think that's the problem... or is it?

I hope someone can help me out. Thanks in advance! :)

Author:  pun¡sher [ Sat Jul 03, 2004 3:36 am ]
Post subject: is the router's IP, you need to enter the IP of your computer. You can find the IP on the routers status page or directly on your computer if you do start->run->"winipcfg" for win98/me or "cmd /k ipconfig" for winxp/2k.

Page 1 of 3 All times are UTC - 7 hours [ DST ]
Powered by phpBB® Forum Software © phpBB Group